iTable is a sheet forming zone for Fourdrinier machines with accurate control of dewatering as well as fibre suspension activity by modifying angles, heights, and vacuum from forming board to the couch roll as per requirement.
Connected to customer’s DCS for flexibility in operation
Different Paper grades can be made with less changes
Identical or improved paper properties with reduced basis weight
Upgraded surface, formation & strength properties
Lower energy demand
Lower cost for raw materials & chemicals for same paper properties
Increased dewatering capacity and machine speed, thereby increasing production
Special Products
Fabricare system
Wet end
Improved cross machine moisture profile.
Work online at 120 bars.
Immediate discharge of contamination due to the safe operation of the Ecoefficiency concept.
Reduced chemical cleaning requirements for fabric and felts
No moving parts on the head it means extreme low maintenance
Special Products
Fabricare system
Dry end
Better cleaning efficiency by needle jet and ultra-high pressure shower.
Work online at 280-300 bars.
Reduction of drying energy (steam) via improved heat transfer through a clean fabric
Extended dryer fabric lifetime due to less risk of damage through chemical wash ups or mechanical cleaning
Improved machine run-ability due to less sheet breaks and effective thread ups on a clean fabric edge.
Special Products
Online PDC
Your dryness inspector for continuous and accurate measurement of relative/absolute dryness of paper web on forming fabric.. Robust, and compact measuring head with adjustable pneumatic loading pressure. Application is possible in all positions within the wire section. Direct link to DCS.
Ability to control vacuum through the dryness reading of online PDC
Improved plybond because of correct paper dryness at bonding points
Improved formation by getting optimum dryness before Dandy or Top former inlet.
Steam saving by getting highest dryness at couch.
Realtime Online dryness reading.
Special Products
I Fiber
I Fiber-DeFlaker
The deFLAKER is a fibre treatment equipment which disperse and homogenize the pulp to improve formation, drainage, strength and saves energy. Shives and stickies are homogenized due to intense fibre to fibre friction which leads to excellent optical appearance.
Simple & fast Installation.
Less maintenance.
Positive strength effect.
Application area – Recycled fiber, virgin fiber.
Special Products
I Fiber
I Fiber-DeSaver
The deSAVER is a patented PGA product and allows to increase the fibre. yield in the last screening stage by 25-40 %. Fibres will be separated / dispersed and can be reused in the process.
Short ROI.
Simple & fast installation.
Environmental friendly.
Less maintenance.
Application area – Recycled fiber.
Special Products
I Fiber
I Fiber-DeTuner
The deTUNER is a high shear mixer that creates a large amount of intense fibre to fibre contacts without shortening the fibres. Fibre to fibre friction causes an excellent homogenization of the pulp and creates micro fibrillation. The gentle fibre treatment has a positive drainage, strength and energy impact
Simple & fast installation.
Less maintenance.
Evergy Saving.
Homogenous pulp.
No fibre shortening.
Improved formation/optical appearance of paper.
Special Products
iSafety
Safety regulations getting more and more important in the pulp and paper industry. Due to governmental regulations as well as personal interests, paper mills all over the world are very interested in the safety of their employees With the iSAFETY-products we want to prevent employees from the most common dangers like falling down, cuttings, clampings, burnings, other serious injuries and in the worst case even of death.
Automatic measurement of dewatering, dryness of felts.
No need to work on a running machine.
Special Products
Web Monitoring System
Web Monitoring System (WMS) is a standard of solving & eliminating even the most difficult paper machine runnability issues,
Off-the-shelf hardware throughout with no proprietary DSP processors.
Industry standard camera interface with over 20 different types of cameras from 30 to 1000 images/second.
High efficiency operation in all conditions with no air required below 50°C.
Patented air-only camera housings never need lens cleaning and require no water or wiper.
Air-only camera lens cleaning.
High-quality heavy-duty stainless steel mounting components and brackets.
Special Products
Web Inspection System
Web Inspection System (WIS) contains both linescan & matrix cameras along with various custom LED lighting configurations for inspecting all types of paper & tissue grades.
100% web inspection for all types of defects.
Customized for each type of application using a full range of industry standard linescan and matrix cameras.
Full range of application optimized reflection and transmission lighting solutions with very long life and low power consumption.
Wide range of software features allowing various defect reasons to be identified resulting in higher machine efficiency and paper quality.
Automated firing of industrial marking systems identifies reel quality at the winder.
Stop-on-defect winder automation provides a complete means of defect quality control and winder runnability optimization.
All hardware based on off-the-shelf non-proprietary components for high reliability, and simple low-cost maintenance.
Special Products
Web Break Detectors
Web Break Detectors are sensors made for tough industrial environments to stop break of paper webs
Heavy-duty fibre optic cable.
Long term reliability.
Innovative technology .
Special Products
Online moisture sensor
SensoWeb
These sensors from Sensorik are used for online detection of moisture & includes SesoWeb CLASSIC, SensoWeb FELT, SensoWeb LB & SesoWeb COMPACT.
Multi spectral-NIR-Sensor.
Fiber optic moisture sensor.
Measuring range of 0 to 80% rel. moisture.
Multi-Sensor solution available for CD profile measurement.
Special Products
Diagnostic Instruments
Fiberscan
FiberScanONE is a highly accurate, non-radioactive, reference microwave meter, for the measurement of consistency/water grammage on paper and pulp machine. The instrument is based on a unique multipatented microwave technology, which allows precise consistency measurements of the paper stock thickness, up to 50mm (2,0”, 50.000gsm). The instrument doesn’t emit any ionizing radiation, therefore it is safe to handle and doesn’t require costly licences to use or permission to travel.
Excellent tool for energy savings & machine optimization
Water mass range : 0-50000gm H2O per m2
Consistency range : 0-80% (Paper), 0.90% (pulp)
Temperature range : 0.80o C
FFT analysis range : 1-512 Hz
Display : OLED
HostXL™, the powerful software tool for data analysis and storage
Special Products
Diagnostic Instruments
PermFlowDUO
PermFlowDUO™ is the world’s first portable moisture & permeability meter for press felts. It can detect the trend of felt mloisture, water permeability, felt surface temperature with great precision and reliability. With sampling speed of 1024 sps for moisture and 256 sps for permeability, PermFlowDUO™ is more than 2.5 times faster than any other permeability meter, For best resolution, when conducting FFT felt barring analysis. All powerful functions (FFT analysis, 3D mapping, clogging analysis) are available on board.
Microwave moisture and permeability meter
Moisture range : 0-3000 Gm. H20 per m2
Permeability range : 10-3000 ml/min
Temperature range : 0-80o C
FFT analysis range : 1-512 Hz (moisture) 1-128 Hz (perm.)
Display : Color 640x480 Pixels OLED backlight
Very light weight Smart Tank for permeability measurement
