Hydraustatic Disc Thickener to pre-thicken the sludge or fibrous material to a consistency of 0.5-6% to 8-16% before it is fed to the screw press.
Ensure both running and economic efficiency.
Operates as hydrostatic thickener without down pipe and can be installed at any place
Comprehensive range machinery equipment including turnkey system.
Conceptual design.
Environment
Screw Press (Ackupress)
Conventional Screw Press design OR Patented “Moving Basket” design Screw Press AKUPRESS in medium and high torque versions are used for dewatering sludge, fibrous material like pulp, rejects, and food waste. Moving Basket design gives 5% to 8% higher dryness than convention screw presses available in the market.
Length of high pressure zone can be adapted to the type of sludge.
Highest adjustable dry content; up to +60% depending upon type of pressed material.
Controlled Torque; no overloading on gearbox.
Throughput can be controlled through screw press frequency.
Hard facing of screw for abrasive sludge.
Environment
Turbo Drain (Gravity Table)
No matter what your sludge thickening problem is, Bellmer has the right thickener especially designed for you. Being the market leader in the field of belt filter technology, we again set standards with the TurboDrain™ Green. This is the first belt thickener which has consequently been developed with the goal of saving natural resources. In developing the TurboDrain™ Green we managed to perform a miracle regarding environmental protection. The sustainable handling of natural resources concerns everybody.
10 % less energy; thanks to energy-saving motor with premium energy efficiency class IE 3 and to smaller spray water pump.
20 % less polymer; thanks to the innovative nanotech belt and the flow optimized inlet
30 % less water; by means of the special shower tube
30 % less noise due to special sealings
Environment
Winkle Press (Belt Press)
Since its launch in 1972, the WinklePress™ has consistently led the mechanical sludge dewatering market because it offers the lowest operational costs and best results in the field. In the latest version WinklePress™ WPN-G, The design has been optimized to be perfectly adapted to today’s needs and changes in sludge composition. Higher dry solids content can now be achieved thanks to the harmonized design of all dewatering stages and the optimized roller configuration. Minimum operating costs (flocculant, energy, water) and high efficiency class motors guarantee the lowest possible energy consumption figures. Cleaning and handling operations are very easy thanks to the large inspection openings
Low noise-level and odourless/no aerosol emissions;thanks to odour hood (optional)
Low energy costs;thanks to high efficiency motors.
Highest capture rate;thanks to optimum filtration using high-tech belts.
Optimum accessibility;thanks to large inspection openings for maintenance and cleaning operations.
Environment
Plastic & Reject Handling
For over 45 years Tecnofer has been producing recycling systems for plastic materials and it has been offering innovative technologies for the recovery and the enhancement of rejects coming from industrial processes: such as pulper’s rejects. Among the production rejects in the paper industry that uses recycled fiber, pulper rejects is the most evident and impacting on an economic and environmental level. It was in fact perceived as an irrecoverable reject, destined for landfills or, in some cases, for waste-to-energy plants. To address this issue Tecnofer developed a technology for the recovery and the valorisation of pulper rejects, offering a solution tailor-made for a better business management. In a recycled mill, pulper rejects mainly contain 70% residues of various kinds (mixed plastics, metals, wood, aggregates, etc.) + 30% recycled fiber. Thanks to its versatility and flexibility features, Tecnofer system can have different configurations to meet customer’s installation requirements. Main machines are:
